2 Chronicles 4:14

Read in context

2 Chronicles 4:12–16 · Berean Standard Bible

12 the two pillars; the two bowl-shaped capitals atop the pillars; the two sets of network covering both bowls of the capitals atop the pillars;

13 the four hundred pomegranates for the two sets of network (two rows of pomegranates for each network covering both the bowl-shaped capitals atop the pillars);

14 the stands; the basins on the stands;

15 the Sea; the twelve oxen underneath the Sea;

16 and the pots, shovels, meat forks, and all the other articles. All these objects that Huram-abi made for King Solomon for the house of the LORD were of polished bronze.

Hebrew words

Data created by STEPBible.org based on work at Tyndale House Cambridge (CC BY 4.0).

Study 2 Chronicles 4:14

Read the commentary on 2 Chronicles 4

Cross-references

The Treasury of Scripture Knowledge lists these related verses. Scripture text comes from the Berean Standard Bible.

1 Kings 7:27

In addition, he made ten movable stands of bronze, each four cubits long, four cubits wide, and three cubits high.

1 Kings 7:28

This was the design of the stands: They had side panels attached to uprights,

1 Kings 7:29

and on the panels between the uprights were lions, oxen, and cherubim. On the uprights was a pedestal above, and below the lions and oxen were wreaths of beveled work.

1 Kings 7:30

Each stand had four bronze wheels with bronze axles and a basin resting on four supports, with wreaths at each side.

1 Kings 7:31

The opening to each stand inside the crown at the top was one cubit deep, with a round opening like the design of a pedestal, a cubit and a half wide. And around its opening were engravings, but the panels of the stands were square, not round.

1 Kings 7:32

There were four wheels under the panels, and the axles of the wheels were attached to the stand; each wheel was a cubit and a half in diameter.

1 Kings 7:33

The wheels were made like chariot wheels; their axles, rims, spokes, and hubs were all of cast metal.

1 Kings 7:34

Each stand had four handles, one for each corner, projecting from the stand.

1 Kings 7:35

At the top of each stand was a circular band half a cubit high. The supports and panels were cast as a unit with the top of the stand.

1 Kings 7:36

He engraved cherubim, lions, and palm trees on the surfaces of the supports and panels, wherever each had space, with wreaths all around.

1 Kings 7:37

In this way he made the ten stands, each with the same casting, dimensions, and shape.

1 Kings 7:38

He also made ten bronze basins, each holding forty baths and measuring four cubits across, one basin for each of the ten stands.

1 Kings 7:39

He set five stands on the south side of the temple and five on the north, and he put the Sea on the south side, at the southeast corner of the temple.

1 Kings 7:40

Additionally, Huram made the pots, shovels, and sprinkling bowls. So Huram finished all the work that he had undertaken for King Solomon in the house of the LORD:

1 Kings 7:41

the two pillars; the two bowl-shaped capitals atop the pillars; the two sets of network covering both bowls of the capitals atop the pillars;

1 Kings 7:42

the four hundred pomegranates for the two sets of network (two rows of pomegranates for each network covering both the bowl-shaped capitals atop the pillars);

1 Kings 7:43

the ten stands; the ten basins on the stands;